CERAMIC FIBRE BLANKETS Properties High Temp. Regular Temp. Low Temp. Maximum use temperature, ºC 1400 1260 980 Dimensions, mm Width: 610, 1220 Length: 7620 Density, kg/m3 [lbs/ft3] 64, 96 and 128 [4, 6 and 8] Thickness, mm 13, 19, 25, 38 and 50 25 and 50 Thermal Conductivity for 128 kg/m3 at mean temp. of 550ºC, W/mºK [BTU-in/hrft2ºF] 0.11 [0.76] Application Crude oil, reformer and pyrolysis heater linings, high temperature pipe, duct and turbine insulation, tube seals, gaskets and expansion joints, heat treating and annealing furnaces, reheating furnaces, soaking pit covers and seals, furnace hot face repairs, kilns and kiln car insulation and seals. Stress relieving insulation, ovens and stack linings. Boiler and air preheater insulation. Fire protection applications etc.

CERAMIC FIBRE MODULES Properties Anchored Veneered Maximum use temperature, ºC High Temp: 1425 Regular Temp: 1300 Dimensions, mm 300X300 and 300X600 300X300 Density, kg/m3 [lbs/ft3] 128 ~ 160 [8 ~ 10] 96 ~ 128 [6 ~ 8] Thickness, mm 100, 150, 200, 250 and 300 50, 75, 100 and 150 Thermal Conductivity for 128 kg/m3 at mean temp. of 550ºC, W/mºK [BTU-in/hrft2ºF] 0.12 [0.84] Application High temperature lining for heaters, furnaces, reformers, kilns and soaking pit seals. Hot face veneering over existing structurally sound brick or monolithic refractory lining in furnaces, heaters, kilns etc.

CERAMIC FIBRE BOARDS/SHAPES Properties High Temp. A Regular Temp. Low Temp. Maximum use temperature, ºC 1400 1260 1200 1000 Dimensions, mm 305X610, 457X914, 610X610, 610X914, 914X1219 Shapes on request Density, kg/m3 [lbs/ft3] 288 ~ 352 [18 ~ 22] 416 ~ 480 [26 ~ 30] 320 ~ 384 [20 ~ 24] 224 ~ 288 [14 ~ 18] Thickness, mm 13, 19, 25, 38, 50, 63 and 75 Thermal Conductivity for 128 kg/m3 at mean temp. of 550ºC, W/mºK [BTU-in/hrft2ºF] 0.1 [0.70] Application Combustion chambers of boilers and heaters, hot face lining for furnaces and kilns, backup insulation for monolithic and bricks. Ladle covers, Aluminium trough liners and special shapes, trough covers. Expansion joints, hot gas duct liners, riser sleeves, crucibles, launders, tap-out cones, sight holes etc.

CERAMIC FIBRE SPECIALITIES (1) Properties Wet Wrap Cement Coating Maximum use temperature, ºC 1260~1400 Upto 1260 1260~1400 Dimensions/Packaging 610X914 mm 10kg bucket 5 litre container Density, kg/m3 [lbs/ft3] 320 [20] - - Thickness, mm 6, 13, 19 and 25 - - Thermal Conductivity for 128 kg/m3 at mean temp. of 550ºC, W/mºK [BTU-in/hrft2ºF] 0.13 [0.09] on drying - - Application Combustion chamber linings, boiler doors, launders, ladle linings Refractory adhesive, repair work Surface stabilization for modules in areas of flame impingement, high velocity, combustion gases or chemical attack

CERAMIC FIBRE SPECIALITIES (2) Properties Veneer Mortar (HT & 90AL) Mouldable F/ Mouldable joint pax Rope Maximum use temperature, ºC Upto 1260 & 1400 Upto 1400 1260~1400 Dimensions/Packaging 20kg bucket 5kg bucket Running length Density, kg/m3 [lbs/ft3] - - 192 ~ 240 [12 ~ 15] Thickness, mm - - 13, 19, 25, 38 and 50 Thermal Conductivity for 128 kg/m3 at mean temp. of 550ºC, W/mºK [BTU-in/hrft2ºF] - - 0.15 [1.0] Application For sticking veneer modules Protective coating, patch repair work, various sealing applications Expansion joints, gaskets, sealing, wrapping, substitute for asbestos